what extra hardware do i need to install a jvc radio in my 2005 colorado
2004-2012 Chevy Colorado and GMC Canyon; 2006-2008 Isuzu I-Series
Upgrading the stereo system in your Colorado, Canyon, or I-Serial
2004 • 2005 • 2006 • 2007 • 2008 • 2009 • 2010 • 2011 • 2012
In brief: This Crutchfield Inquiry Garage article gives y'all an overview of your truck's stock stereo system and your aftermarket upgrade options. Use our vehicle selector to find the gear that will fit your Chevy, GMC, or Isuzu pickup.
Overview of the Colorado, Canyon, and I-Series pickups
Zip succeeds like excess these days, which more or less explains the notion of a total-size pickup truck with enough power to motion Mount Rushmore, plus plenty luxurious leather to outfit a high-cease cigar bar.
But not everyone needs that much awesomeness from a pickup. Some of us only want a solid, capable truck that can booty people and stuff without taking up too much space in the parking lot – or the budget.
And that'due south where the Chevy Colorado/GMC Canyon twins (and the exceedingly rare Isuzu I-Series) come in. These mid-sized trucks proved to be just the right size for a large number of people. The number of cab variations, options, and engine choices made it easy for anyone to create their perfect truck.
However, the manufacturing plant stereos were less than perfect and they haven't exactly improved with age. If you're notwithstanding enjoying your pickup, but getting tired of weak audio and old tech, our experts can assist you add new life to your truck'southward audio system.
The factory radio is your basic AM/FM/CD receiver (Crutchfield Research Photograph)
Manufactory stereo system
The Colorado, Coulee, and I-Serial (Nosotros'll simply refer to the Colorado from here on out, since the instructions are the same for all three and information technology'southward easier to blazon.) were available with an all-encompassing assortment of options and packages. Satellite radio was one of those options, but you'll lose that when yous replace the one-time radio. Thankfully, many new aftermarket models are SiriusXM ready.
The standard AM/FM/CD receiver and OnStar® will look familiar to anyone familiar with GM vehicles of the era, and the number of speakers varies according to which cab you're dealing with.
Here'south a expect at the support subclass you'll (probably) need to remove (Crutchfield Research Photograph)
The nigh challenging attribute of the job is that you'll probably need to remove a rear back up bracket within the dash when you lot install most car stereos. The only thing the bracket supports is the factory receiver, then don't worry most the nuance caving in the second yous cutting it free.
If the thought of hacking something out of your dash makes you a little nervous, yous should check out a digital media receiver. These receivers don't have a CD actor built-in, then the chassis is often much smaller. Most models will fit in the cavity without the need for any modifications.
Detailed stereo and speaker removal instructions
With step-past-stride disassembly instructions and plenty of up-close, detailed photos, our sectional Crutchfield MasterSheet™ takes the guesswork out of removing the factory stereo and speakers. It's free with your Crutchfield social club, or yous tin can purchase one separately for just $nine.99.
Installing a new receiver can disable the warning chimes in your Colorado, then you must utilise the recommended integration adapter to retain these warning chimes. Because this is an important safety outcome, we volition not provide technical support for any installation that does not utilize the recommended adapter. You don't accept to buy the adapter from us, but you lot'll get a very squeamish discount when you guild from Crutchfield, so it's a adept idea to practice so.
If you have installation questions, call back that you have free access to Crutchfield'south adept tech support staff for the life of your gear.
Tools needed: Panel tool, 7mm socket, ratchet, and extension
Shop for car stereos that fit your GMC Canyon
The front doors incorporate woofers and, in some trucks, tweeters (Crutchfield Research Photo)
Replacing your factory speakers
These trucks accept speakers in the front and rear doors.
Front end door speakers
The front door speakers (or only door speakers, if y'all have a standard cab) are 6-3/4" models that can exist replaced with aforementioned-size, 6-1/2", or 5-1/4" aftermarket speakers. You lot'll need mounting brackets for the smaller ones, and they're bachelor at a deep disbelieve with your Crutchfield speaker guild.
You'll start by prying out the height of the sail panel, which will release the prune that holds the panel in place. Remove information technology, then movement down the door, remove the Phillips screw within the door release trim, and pry off that piece.
What happens adjacent depends on whether you have power or manual windows:
Removing the power window controls (Crutchfield Research Photo)
- If you have the ability kind, remove 2 Phillips screws in the door-pull cup, then lift the door pull/power switch console from the rear and pry up the front end edge. Pull up the panel, disconnect the wiring harnesses and remove it.
This is a window creepo, kids. Inquire your parents... (Crutchfield Research Photo)
- If you have good one-time-fashioned manual windows, utilize a store rag in a back-and-forth motion to release the "C" clip on the rear of the window crank and loosen information technology until y'all can pull it off.
Okay, where were nosotros? Right. At present you lot'll pry out the sides and bottom of the door console to release the retaining clips. Lift the panel, disconnect the tweeter wiring harness (if equipped, meet below) and remove the panel. Remove one Phillips screw from the peak edge of the factory speaker, then fold the speaker forrard, disconnect the wiring harness, and remove information technology.
If yous're using an adapter bracket, secure the speaker to the bracket post-obit the instructions in the bracket package. If not, you'll demand to place the speaker in the desired location and apply information technology as a template to mark the spots for the new mounting holes. Y'all'll and so use a drill and a 1/eight" bit to drill the new holes.
If you're fifty-fifty slightly handy around the home and garage, you already know how to employ a power drill. That said, nosotros should remind you to be extremely conscientious when drilling in a vehicle. Exist enlightened of things such every bit wiring, windows, fuel lines and safety devices. And, of form, check (and re-cheque) the drilling depth and location before you drill.
One time everything's in place, exam the speakers to make sure they're working properly, then double-check to brand certain the windows and door locks are working as they should before you commencement putting the door dorsum together.
One last thing: Your new speakers might include mounting screws, just then again, they might not. Check your packaging and, if needed, make that run to the hardware shop before you offset working.
Tools needed: Phillips screwdriver, panel tool, drill and 1/8" bit, shop rag (e'er a good matter to have handy)
The tweeters are attached to the door panels (Crutchfield Research Photograph)
Forepart door tweeters
If your truck has factory tweeters, they're mounted on the inside of the door panels. They're a tad less than 1-one/2" in diameter, and tin be replaced by the tweeters found in well-nigh component speaker sets.
They're attached to the panel past three plastic clips, and then pry those upwardly, disconnect the harness, and remove the tweeter. A mounting bracket is non available, then y'all'll need to use backstraps, hot glue, or silicone to secure your new speakers.
If you're feeling brave, in that location's another approach you can have. Utilize a hole saw to cut out the mill tweeter grilles and utilize the hardware included with your new tweeters to flush-mount the tweeters to the doors. Information technology's a bit more work, but information technology'll look terrific. Refer to the tweeters' installation instructions to see what size whole you'll need to drill.
Tools needed: Panel tool, Phillips screwdriver
The Coiffure Cab rear doors comprise half-dozen-3/4" stock speakers (Crutchfield Research Photo)
Rear door speakers (Coiffure Cab)
The rear door speakers on the Coiffure Cab are also half-dozen-3/4" models, and they tin be replaced with same-size, vi-i/ii", or 5-1/iv" aftermarket speakers. You'll need mounting brackets for the smaller ones, and they're available at a deep disbelieve with your Crutchfield speaker order.
The removal and replacement process is very similar to the front end doors, right downwardly to the differences with the windows and the drilling of new mounting holes. Details can be found in your Crutchfield MasterSheet.
Tools needed: Phillips screwdriver, console tool, Torx T-twenty commuter, shop rag
The Extended Cab has the same speakers, just in different doors (Crutchfield Research Photograph)
Rear door speakers (Extended Cab)
Extended Cab Colorados likewise have 6-3/4" rear door speakers, but the doors are different and then is the removal process. Non vastly different, mind you lot, but still worth talking virtually.
You lot'll start by removing two Phillips screws from the lesser of the door pull loving cup. Pry up the front end edge of the power switch panel to release one retaining prune, then disconnect the wiring harnesses and remove the console. From there, motility down the door and remove a Torx T50 bolt from the seat chugalug anchor.
With that out of the way, first prying around sides and lesser of the lower door panel to release the retaining clips, then lift and remove the panel. Remove the Torx T20 screw from the factory speaker/bracket assembly and remove the whole assembly.
Once you've secured the new speaker to the bracket assembly, yous'll need to marker your new mounting holes. The marking and drilling process is the same here as it was up front, so the same safe instructions apply. Work advisedly and wear eye protection.
Once everything'south in place, exam the speakers to make sure everything's working properly, and then double-check to make sure the windows and door locks are working as they should before you lot start putting the door back together. Yous'll also want to make sure the seat belt anchors are properly secured.
Shop for speakers that fit your GMC Coulee
Bass in your Colorado, Canyon, or I-Series pickup
Adding a subwoofer box to your truck depends on which type of cab you're working with. In a standard cab, y'all'll accept a 20" W x 15" H x 10"/3" D space to work with – in other words, not much. But that's still more than y'all arrive a Crew Cab or Extended Cab, neither of which offer whatsoever space at all.
If you desire to add bass to an Extended Cab Colorado, your best bet is probably a powered subwoofer.
Shop for vehicle-specific subwoofers for your GMC Canyon
The Kenwood CMOS-320 rearview camera has 4 viewing modes
Other options for your Colorado, Canyon, or I-Series
Hither are some other smart ideas for your Chevy Colorado, GMC Canyon, or Isuzu I-Series pickup.
Rear-view camera
These are mid-sized trucks, only they tin can still be a handful in tight parking spots. A rear-view camera will enhance your safe and peace of mind.
Add an amplifier
If you're tired of road noise in your truck, a 4-channel amplifier will assist you overcome information technology. Yous'll be able to hear your music clearly, even at highway speeds.
Speaker baffles
We often propose speaker baffles for other vehicles, but for these trucks, nosotros strongly recommend them. Those doors tin waste product a lot of great sound, and this is an inexpensive manner to rein it back in. These foam baffles are like shooting fish in a barrel to install, and they'll give yous improved performance while as well protecting your speakers.
Security
Installing a security arrangement in your truck won't be easy (security systems rarely are), but it's definitely a good idea. Our Crutchfield Advisors can help figure out what yous demand to become the job done, only nosotros usually recommend taking your car and new gear to a professional installer.
Shop for machine security systems for your GMC Canyon
Find the audio gear that fits your car or truck
Visit our Outfit My Motorcar folio and enter your vehicle information to come across stereos, speakers, subs, and other audio accessories that will work in your vehicle.
Source: https://www.crutchfield.com/ISEO-rgbtcspd/learn/2004-12-chevy-colorado-and-gmc-canyon.html
0 Response to "what extra hardware do i need to install a jvc radio in my 2005 colorado"
Enregistrer un commentaire